Battery
Battery recharge time:Approximate time required to recharge the battery from completely empty to completely full
3 h
Typical backup time at half load:The amount of time that a backup energy source (e.g. UPS - Uninterruptible Power Source) can power the device for, when the backup energy source is half-loaded (50% of capacity).
21.5 min
Typical backup time at full load:The amount of time that a backup energy source (e.g. UPS - Uninterruptible Power Source) can power the device for, when the backup energy source is fully loaded (100% of capacity).
8.5 min
Battery voltage:The voltage (V) of the battery.
12 V
Battery capacity:A measure of the charge stored by the battery. Determined by the mass of active material contained in the battery.
9 VAh
Battery technology:The type of battery in the device, e.g. nickel–cadmium (NiCd).
Sealed Lead Acid (VRLA)
Design
Certification:
IEC/EN/AS 62040-2 2nd Ed (Cat 2 – 6);
FCC 15 A
CISPR22 A(RFI)
Safety:List of regulatory safety standards for all countries in which this product has been certified.
IEC62040-1:2008, GS; UL1778, c-UL
International Protection (IP) code:The IP code classifies and rates the degree of protection provided against the intrusion (including body parts such as hands and fingers), dust, accidental contact, and water by mechanical casings and electrical enclosures. It is published by the International Electrotechnical Commission (IEC). The digits (characteristic numerals) indicate conformity with the conditions summarized in the tables below. Where there is no protection rating with regard to one of the criteria, the digit is replaced with the letter X. an electrical socket rated IP22 is protected against insertion of fingers and will not be damaged or become unsafe during a specified test in which it is exposed to vertically or nearly vertically dripping water. Another example is the Sony Xperia Z Ultra, one of the first cellular phones to be IP-rated; it is rated at IP58 and marketed as "dust resistant" and can be "immersed in 1.5 meter of freshwater for up to 30 minutes".
IP20
Display type:Type of display (screen) e.g. LCD.
LCD
Form factor:The shape or design of the product.
Rackmount/Tower
Features
Audible alarm(s):Alarms that make a sound when they are activated (set off).
Power protection features:Features that protect the device against power problems e.g. overload.
Overload
Noise level:The amplitude level of the undesired background noise, usually measured in decibels (db).
58 dB
Emergency Power Off (EPO):
Output voltage regulation:
3%
Output frequency:
50/60 Hz
Output operation voltage (max):The maximum output voltage produced by the device.
240 V
Input frequency:The frequency (Hz) which is required to power the product.
40 - 70 Hz
Input operation voltage (max):The maximum input voltage supported by the device.
288 V
Input operation voltage (min):The minumum voltage needed by the device during operation.
115 V
Output power:The power that the device can produce.
750 W
Output power capacity:The maximum power that the device can produce.
0.75 kVA
UPS topology:
Double-conversion (Online)
General
Type:Characteristics of the device.
Unclassified
Logistics data
Harmonized System (HS) code:
85078000
Operational conditions
Operating altitude:
0 - 3000 m
Storage relative humidity (H-H):
0 - 95%
Operating relative humidity (H-H):
0 - 95%
Storage temperature (T-T):The minimum and maximum temperatures at which the product can be safely stored.
-15 - 40 °C
Operating temperature (T-T):The minimum and maximum temperatures at which the product can be safely operated.
0 - 40 °C
Other features
Non-operating relative humidity (non-condensing):Range of relative humidity (non-condensing) in which a non-operating product can be stored.
0 - 95%
Package dimensions (WxDxH):Dimensions of the packaged product (Width x Depth x Height).
517 x 617 x 262 mm
Nominal input voltage:The voltage which the manufacturer recommends that the device needs to operate normally.
230 V
Nominal output voltage:The voltage which the manufacturer states that the device can produce.
230 V
Dimensions (WxDxH):Dimensions of the product (Width x Depth x Height).
430 x 400 x 85 mm
Input connection type:The type of connection /port for the input(s) into this device e.g. USB.
C14
Output connections:
IEC320 C13
Battery type:Description of battery supplied with the product, such battery form factor (e.g. AA/AAA).
VRLA
Ports & interfaces
Emergency Power Off (EPO) connector:
Serial ports quantity:The number of serial ports in a computer or peripheral. A serial port is a serial communication physical interface through which information transfers in or out one bit at a time. The term "serial port" usually identifies hardware more or less compliant to the RS-232 standard, intended to interface with a modem or with a similar communication device. In modern computers and peripherals, serial ports have largely been replaced by USBs and other interfaces.
1
Serial interface type:
RS-232, RS-485
USB port:Universal Serial Bus (USB) is an industry standard developed in the mid-1990s that defines the cables, connectors and communications protocols used in a bus for connection, communication, and power supply between computers and electronic devices. USB was designed to standardize the connection of computer peripherals (including keyboards, pointing devices, digital cameras, printers, portable media players, disk drives and network adapters) to personal computers, both to communicate and to supply electric power. It has become commonplace on other devices, such as smartphones, PDAs and video game consoles. USB has effectively replaced a variety of earlier interfaces, such as serial and parallel ports, as well as separate power chargers for portable devices.
AC outlets quantity:The number of sockets in the device where AC electrical power can be connected.
8 AC outlet(s)
AC outlet types:The type of outlet for AC electricity.
C13 coupler, C19 coupler
Technical details
Compliance certificates:
RoHS
Sustainability certificates:
ENERGY STAR
Weight & dimensions
Package weight:Weight of the packaged product.
21 kg
Package height:The distance from the top to the bottom of the packaging.
262 mm
Package depth:The distance from the front to the back of the packaging.
617 mm
Package width:The distance from one side of the packaging to the other.
517 mm
Weight:Weight of the product without packaging (net weight). If possible, the net weight is given including standard accessories and supplies. Please note that sometimes the manufacturer leaves out the weight of accessories and/or supplies.
21 kg
Height:The measurement of the product from head to foot or from base to top.
85 mm
Depth:The distance from the front to the back of something.
400 mm
Width:The measurement or extent of something from side to side.
430 mm
