Certificates
Compliance certificates:
RoHS
Certification
Compliance certificates:
RoHS
Features
Compatible products:Other products that can be used with this product.
Zyxel SFP10G-SR-ZZ0101F
Brand compatibility:What other brands this brand can be used with.
Zyxel
Hot-Plug support:Device has hot-plug capability, which means that user can replace system components without shutting down the system.
Plug and Play:Indicates whether this product supports is "plug and play". Plug and play is hardware or software that, after being installed ("plugged in"), can immediately be used ("played with"), as opposed to hardware or software which requires configuration.
Form factor:The shape or design of the product.
SFP+
Operational conditions
Operating relative humidity (H-H):
10 - 85%
Storage temperature (T-T):The minimum and maximum temperatures at which the product can be safely stored.
-40 - 85 °C
Operating temperature (T-T):The minimum and maximum temperatures at which the product can be safely operated.
0 - 70 °C
Maximum operating temperature:
70 °C
Minimum operating temperature:
0 °C
Packaging content
Quantity per pack:The amount in each pack.
1 pc(s)
Packaging data
Package weight:Weight of the packaged product.
30 g
Package height:The distance from the top to the bottom of the packaging.
24 mm
Package depth:The distance from the front to the back of the packaging.
67 mm
Package width:The distance from one side of the packaging to the other.
106 mm
Performance
Digital Diagnostics Monitoring (DDM):
Auto MDI/MDI-X:A Medium Dependent Interface (MDI) describes the interface (both physical and electrical) in a computer network from a physical layer implementation to the physical medium used to carry the transmission. Ethernet over twisted pair also defines a medium dependent interface crossover (MDIX) interface. Auto-MDIX ports on newer network interfaces detect if the connection would require a crossover, and automatically chooses the MDI or MDIX configuration to properly match the other end of the link.
Duplex system:A duplex communication system is a point-to-point system composed of two connected parties or devices that can communicate with one another in both directions, simultaneously.
Full
Ethernet interface type:
10 Gigabit Ethernet
Wavelength:The distance over which a wave repeats itself. The wavelength determines the characteristics of the wave e.g. red light has a different wavelength to blue light.
850 nm
Maximum transfer distance:The greatest distance over which the data/signal can be transferred.
300 m
SFP transceiver standard:
SR
Fiber cable diameters supported (core/cladding):
50/125,62.5/125 µm
Fiber optic connector:This terminates the end of an optical fiber, and enables quicker connection and disconnection than splicing. The connectors mechanically couple and align the cores of fibers so light can pass. Better connectors lose very little light due to reflection or misalignment of the fibers. In all there have been about 100 types of optic fiber connectors produced.
LC
Multi-mode fiber (MMF) supported:
Single-mode fiber (SMF) supported:
Maximum data transfer rate:
10000 Mbit/s
SFP transceiver type:
Fiber optic
Weight & dimensions
Weight:Weight of the product without packaging (net weight). If possible, the net weight is given including standard accessories and supplies. Please note that sometimes the manufacturer leaves out the weight of accessories and/or supplies.
10 g
Height:The measurement of the product from head to foot or from base to top.
8.5 mm
Depth:The distance from the front to the back of something.
56.5 mm
Width:The measurement or extent of something from side to side.
13.4 mm
