Certificates
Certification:
EMI:CISPR 22, FCC Part 15B Class A
Certification
Certification:
EMI:CISPR 22, FCC Part 15B Class A
Data transmission
Packet buffer memory:
0.128 MB
MAC address table:The MAC address is the 'Media Access Control Address'. It is a unique address given to a network interface controller (NIC) in a device. A MAC address table shows the addresses in a table format.
8000 entries
Design
Electromagnetic compatibility:List of countries and their respective regulatory agency standards with which the product complies.
EN 55022/24
Safety:List of regulatory safety standards for all countries in which this product has been certified.
UL 508
International Protection (IP) code:The IP code classifies and rates the degree of protection provided against the intrusion (including body parts such as hands and fingers), dust, accidental contact, and water by mechanical casings and electrical enclosures. It is published by the International Electrotechnical Commission (IEC). The digits (characteristic numerals) indicate conformity with the conditions summarized in the tables below. Where there is no protection rating with regard to one of the criteria, the digit is replaced with the letter X. an electrical socket rated IP22 is protected against insertion of fingers and will not be damaged or become unsafe during a specified test in which it is exposed to vertically or nearly vertically dripping water. Another example is the Sony Xperia Z Ultra, one of the first cellular phones to be IP-rated; it is rated at IP58 and marketed as "dust resistant" and can be "immersed in 1.5 meter of freshwater for up to 30 minutes".
IP30
Wall mountable:The product can be mounted on (attached to ) a wall.
Product colour:
Aluminium, Black, Green
Form factor:The shape or design of the product.
4U
Rack mounting:The type of mounting that can position devices in a shelving system (rack).
Management features
Switch type:What switch device has, managed or unmanaged.
Unmanaged
Network
Auto MDI/MDI-X:A Medium Dependent Interface (MDI) describes the interface (both physical and electrical) in a computer network from a physical layer implementation to the physical medium used to carry the transmission. Ethernet over twisted pair also defines a medium dependent interface crossover (MDIX) interface. Auto-MDIX ports on newer network interfaces detect if the connection would require a crossover, and automatically chooses the MDI or MDIX configuration to properly match the other end of the link.
Full duplex:A full-duplex system allows communication in both directions, and unlike half-duplex, allows this to happen simultaneously.
Copper ethernet cabling technology:
10BASE-T, 100BASE-TX, 1000BASE-T
Networking standards:The way in which the network is working, e.g. IEEE 802.11a, IEEE 802.11b, IEEE 802.11g.
IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z
Networking
Auto MDI/MDI-X:A Medium Dependent Interface (MDI) describes the interface (both physical and electrical) in a computer network from a physical layer implementation to the physical medium used to carry the transmission. Ethernet over twisted pair also defines a medium dependent interface crossover (MDIX) interface. Auto-MDIX ports on newer network interfaces detect if the connection would require a crossover, and automatically chooses the MDI or MDIX configuration to properly match the other end of the link.
Full duplex:A full-duplex system allows communication in both directions, and unlike half-duplex, allows this to happen simultaneously.
Copper ethernet cabling technology:
10BASE-T, 100BASE-TX, 1000BASE-T
Networking standards:The way in which the network is working, e.g. IEEE 802.11a, IEEE 802.11b, IEEE 802.11g.
IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z
Operational conditions
Operating relative humidity (H-H):
5 - 95%
Storage temperature (T-T):The minimum and maximum temperatures at which the product can be safely stored.
-40 - 85 °C
Operating temperature (T-T):The minimum and maximum temperatures at which the product can be safely operated.
-40 - 75 °C
Other features
Packaging content
Performance
Mean time between failures (MTBF):Statistical model used to indicate product/mechanism reliability; expressed in hours and percentage of duty cycle. This number (in hours) does not indicate the mean time before failure for a single unit/mechanism.
1257910 h
Ports & interfaces
Power connector:
DC-in jack
Basic switching RJ-45 Ethernet ports type:The type/category of basic switching RJ-45 Ethernet ports (sockets).
Gigabit Ethernet (10/100/1000)
Basic switching RJ-45 Ethernet ports quantity:The number of basic switching RJ-45 Ethernet ports (sockets).
5
Power
Power protection features:Features that protect the device against power problems e.g. overload.
Overload
Power consumption (typical):Amount of power consumed by this model, often expressed in watts (W). Typical values that manufacturers give are power consumption when off, standby/suspended mode, typical use, maximum usage.
11.73 W
Input voltage:The voltage (V) which is required to power the product.
12/24/48 V
Redundant power supply (RPS) support:Additional power supply which can run a computer if the main power supply fails.
Power over Ethernet (PoE)
Total Power over Ethernet (PoE) budget:
144 W
Power over Ethernet (PoE) power per port:
36 W
Power over Ethernet (PoE) voltage range:
12 - 48 V
Power over Ethernet (PoE) ports quantity:
4
Power over Ethernet (PoE):The device supports Power over Ethernet (PoE), which is one of several standardized or ad-hoc systems which pass electrical power along with data on Ethernet cabling. This allows a single cable to provide both data connection and electrical power to devices such as wireless access points or IP cameras.
Weight & dimensions
Weight:Weight of the product without packaging (net weight). If possible, the net weight is given including standard accessories and supplies. Please note that sometimes the manufacturer leaves out the weight of accessories and/or supplies.
300 g
Height:The measurement of the product from head to foot or from base to top.
135 mm
Depth:The distance from the front to the back of something.
105 mm
Width:The measurement or extent of something from side to side.
29 mm
