Certificates
Compliance certificates:
CE, RoHS
Certification
Compliance certificates:
CE, RoHS
Data transmission
Switching capacity:The data transfer capacity of the switch per second.
2.5 Gbit/s
Design
Wall mountable:The product can be mounted on (attached to ) a wall.
Rack mounting:The type of mounting that can position devices in a shelving system (rack).
General
Type:Characteristics of the device.
Network Switches
Logistics data
Products per master (outer) case:
10 pc(s)
Harmonized System (HS) code:
85176990
Master (outer) case height:
290 mm
Master (outer) case length:
370 mm
Master (outer) case width:
305 mm
Management features
Quality of Service (QoS) support:
Switch type:What switch device has, managed or unmanaged.
Unmanaged
Network
Auto MDI/MDI-X:A Medium Dependent Interface (MDI) describes the interface (both physical and electrical) in a computer network from a physical layer implementation to the physical medium used to carry the transmission. Ethernet over twisted pair also defines a medium dependent interface crossover (MDIX) interface. Auto-MDIX ports on newer network interfaces detect if the connection would require a crossover, and automatically chooses the MDI or MDIX configuration to properly match the other end of the link.
Full duplex:A full-duplex system allows communication in both directions, and unlike half-duplex, allows this to happen simultaneously.
Cable types supported:
Cat5e, Cat6, Cat6a
Copper ethernet cabling technology:
10BASE-T, 1000BASE-TX, 2500BASE-T
10G support:The product can use Oracle 10G, which is a database management system introduced in 2003.
Networking standards:The way in which the network is working, e.g. IEEE 802.11a, IEEE 802.11b, IEEE 802.11g.
IEEE 802.1p, IEEE 802.3, IEEE 802.3ab, IEEE 802.3az, IEEE 802.3bz, IEEE 802.3u, IEEE 802.3x
Networking
Auto MDI/MDI-X:A Medium Dependent Interface (MDI) describes the interface (both physical and electrical) in a computer network from a physical layer implementation to the physical medium used to carry the transmission. Ethernet over twisted pair also defines a medium dependent interface crossover (MDIX) interface. Auto-MDIX ports on newer network interfaces detect if the connection would require a crossover, and automatically chooses the MDI or MDIX configuration to properly match the other end of the link.
Full duplex:A full-duplex system allows communication in both directions, and unlike half-duplex, allows this to happen simultaneously.
Cable types supported:
Cat5e, Cat6, Cat6a
Copper ethernet cabling technology:
10BASE-T, 1000BASE-TX, 2500BASE-T
10G support:The product can use Oracle 10G, which is a database management system introduced in 2003.
Networking standards:The way in which the network is working, e.g. IEEE 802.11a, IEEE 802.11b, IEEE 802.11g.
IEEE 802.1p, IEEE 802.3, IEEE 802.3ab, IEEE 802.3az, IEEE 802.3bz, IEEE 802.3u, IEEE 802.3x
Operational conditions
Operating relative humidity (H-H):
10 - 90%
Storage temperature (T-T):The minimum and maximum temperatures at which the product can be safely stored.
-20 - 60 °C
Operating temperature (T-T):The minimum and maximum temperatures at which the product can be safely operated.
0 - 45 °C
Packaging content
Quick start guide:Instructions, either online, as a computer program or in paper form, to allow you to set up and start using the product quickly.
Packaging data
Package weight:Weight of the packaged product.
700 g
Package height:The distance from the top to the bottom of the packaging.
70 mm
Package depth:The distance from the front to the back of the packaging.
135 mm
Package width:The distance from one side of the packaging to the other.
285 mm
Performance
Maximum cable length:
100 m
Ports & interfaces
Power connector:
DC-in jack
Installed SFP+ modules quantity:An SFP ("small form-factor pluggable transceiver") is a transmitter/receiver which interfaces a network device motherboard (e.g. in a switch, router) to a fibre optic or copper network cable. The enhanced small form-factor pluggable (SFP+) is an enhanced version of the SFP that supports data rates up to 10 Gbit/s. The "SFP+ ports quantity" is the number of ports for SFP+ connections in a device.
0
Installed SFP modules quantity:An SFP ("small form-factor pluggable transceiver") is a transmitter/receiver which interfaces a network device motherboard (e.g. in a switch, router) to a fibre optic or copper network cable. The "SFP ports quantity" is the number of ports for SFP connections in a device.
0
2.5G Ethernet (copper) ports quantity:
5
Basic switching RJ-45 Ethernet ports type:The type/category of basic switching RJ-45 Ethernet ports (sockets).
2.5G Ethernet (100/1000/2500)
Basic switching RJ-45 Ethernet ports quantity:The number of basic switching RJ-45 Ethernet ports (sockets).
5
Power
AC input voltage:The voltage of the AC electricity that is inpitted into the product.
100 - 240 V
Power supply included:There is a power supply with this product.
Power source:What is providing power for the product e.g. mains electricity.
AC/DC
Power over Ethernet (PoE)
Power over Ethernet (PoE):The device supports Power over Ethernet (PoE), which is one of several standardized or ad-hoc systems which pass electrical power along with data on Ethernet cabling. This allows a single cable to provide both data connection and electrical power to devices such as wireless access points or IP cameras.
Weight & dimensions
Weight:Weight of the product without packaging (net weight). If possible, the net weight is given including standard accessories and supplies. Please note that sometimes the manufacturer leaves out the weight of accessories and/or supplies.
600 g
Height:The measurement of the product from head to foot or from base to top.
30 mm
Depth:The distance from the front to the back of something.
145 mm
Width:The measurement or extent of something from side to side.
120 mm
